Free machining austenitic stainless steel with high sulphur content

Maxival free machining austenitic stainless steel Austenitic stainless steel Valbruna Stainless Steel

Austenitic Stainless Steel

Machinability
Home | Machinability | Machining | Comparison | Cutting data | Properties | Contact | Site Map

 

 

 

PROPERTIES


 

CHEMICAL COMPOSITION

                         
  C Si Mn P S N Cr Cu Mo Nb Ni Ti
        max                
303 - 1,4305
(MV188HS)
<=0,10 <=1,00 <=2,00 0.045 0,25 to 0,35 <=0,11 17,00 to 19,00 <= 1,00 - - 8,00 to 10,00 -
304 - 1.4301
(MVAISDE)
<=0,07 <=1,00 <=2,00 0.045 <=0,030 <=0,11 17,50 to 19,50 - - - 8,00 to 10,50 -
304L - 1.4307 (MVAISL) <=0,03 <=1,00 <=2,00 0.045 <=0,030 <=0,11 18,00 to 20,00 - - - 8,00 to 10,50 -
316 - 1.4401
(MVAPM)
<=0,07 <=1,00 <=2,00 0.045 <=0,030 <=0,11 16,50 to 18,50 - 2,00 to 2,50 - 10,00 to 13,00 -
316L - 1.4404 (MVAPML) <=0,03 <=1,00 <=2,00 0.045 <=0,030 <=0,11 16,50 to 18,50 - 2,00 to 2,50 - 10,00 to 13,00 -
316 - 1.4436
(MVAPMDE2)
<=0,05 <=1,00 <=2,00 0.045 <=0,030 <=0,11 16,50 to 18,50 - 2,50 to 3,00 - 10,50 to 13,00 -
316L - 1.4435 (MVAPMLD2) <=0,03 <=1,00 <=2,00 0.045 <=0,030 <=0,11 17,00 to 19,00 - 2,50 to 3,00 - 12,50 to 15,00 -
1.4460 - 329
(MV274MDE)
<=0.05 <=1.00 <=2.00 0.040 <=0.030 0,05 to 0,20 25,00 to 28,00 - 1,30 to 2,00 - 4,50 to 6,50 -
 

 


Home | Machinability | Machining | Comparison | Cutting data | Properties | Contact | Site Map

© SUNSTREAMS CONSULTING 

®